ShiTeng Traffic Facilities Co.,Ltd.

Thrie-beam Plastic Sprayed Corrugated Beam 3.0

  • third-beam-plastic-sprayed-beam-3-1
  • third-beam-plastic-sprayed-beam-3-1
  • third-beam-plastic-sprayed-beam-3-1
CONTACT NOW

Features Related Products


Introduction of Thrie-beam Plastic Sprayed Corrugated Beam 3.0:

Three guardrail plate length average of 4.32 meters, width is 506 millimeter, the cross-section width is 85 mm - 85 mm, the thickness of the steel plate is commonly 4 mm, three guardrail plate column can processing according to the custom.

Features of Thrie-beam Plastic Sprayed Corrugated Beam 3.0:

  • High-quality range ( Q235/Q345) material,the surface is hot dipped galvanized with plastic sprayed, the effect of anti-corrosion and waterproof is better.
  • Wider panel, larger anti-collision area, and batter anti-collision effect.
  • Assembled design, easy and quick installation
  • Four layers of anti-corrosive treatment, effectively solve the problems of the surface rust, pulverization, crack and so on.
  • Good decorative, rich color, meet different customers' personalized requirements for fence products.
  • Environmental protection, environmental pollution. Solve the problem of common product pollution building.

Specification of Thrie-beam Plastic Sprayed Corrugated Beam 3.0:


Product Name

Thrie-beam Plastic Sprayed Corrugated Beam 4.0

Material

Q235(SJ235R), Q345(SJ345R)

Zine Coating

550-1100g/㎡ + Plastic sprayed

Color

Blue, Green, Yellow, White or as your requirement

Thickness(+/-0.015)

3.0mm

Length

4130/4320mm

Width

506/510mm

Wave Height

83/85mm

Theoretical Weight

96kg

Technology

Cold Rolled

Surface treatment

Hot dipped Galvanized +Plastic sprayed

Applicable Standards

JT/T281-2007,AASHTO M-180

Application

Expressway,  Highway,  Country road,


Delivery & Package:

  • 20pieces per bundle and fasten the bundle with wire straps or ropes
  • One 20'GP can be load about 22ton.
  • Customers' requirement are available
Delivery Time: Within 15-25 days after receiving the deposit.


  • Square Shaped Post
    Introduction of Square Shaped Post: The corrugated guardrail can be approximated as a continuous beam supported on the elastic foundation. Vehicle at an Angle (ϴ = 10 ° ~ 20 °) ACTS on the fence of... Square Shaped Post
  • W-beam Plastic Sprayed Corrugated Beam 3.0mm
    Introduction of W-beam Plastic Sprayed Corrugated Beam 3.0mm: Spray-plastic guardrails are sprayed on the product on the basis of hot galvanizing, which is better than ordinary hot galvanizing for the... W-beam Plastic Sprayed Corrugated Beam 3.0mm
  • Round Shaped Post
    Specification of Round Shaped Post:The corrugated guardrail is composed of two posts (columns), which are composed of the beam and beam corrugated beam steel guardrails and between them, and the two g... Round Shaped Post
  • Highway Guardrail Reflector
    The highway guardrail reflector also called delineator, is set along the road sides, is used to display the road boundary contour, guided vehicles moving on the right way. According to its different s... Highway Guardrail Reflector
  • Highway Guardrail Bull Nose End
    The highway guardrail terminal is generally divided into fishtail end, bull nose end , buffer end and central divider end. Different types of highway terminals apply to different locations. The nose e... Highway Guardrail Bull Nose End
  • Thrie-beam Plastic Sprayed Corrugated Beam 4.0
    Introduction of Thrie-beam Plastic Sprayed Corrugated Beam 3.0: Three guardrail plate length average of 4.32 meters, width is 506 millimeter, the cross-section width is 85 mm - 85 mm, the thickness of... Thrie-beam Plastic Sprayed Corrugated Beam 4.0
  • Screw
  • Anti-crash Highway Safety Roller Barrier Accessories
Leave a Message Email Us

we will contact you within 24 hours.