ShiTeng Traffic Facilities Co.,Ltd.

Anti-crash Highway Safety Single-bucket Roller Barrier

CONTACT NOW
Anti-crash Highway Safety Single-bucket Roller Barrier video

Features Specification Application Installation Related Products


Introduction:
The material on the surface of the Anti crash highway safety roller barrier is similar to  sponge, and the support shaft of the bucket center ensures that it can rotate freely. In particular, it has a strong resilience, and in generally, it can be restored immediately, even was storming by the motor vehicles .Anti crash highway safety single-bucket roller barrier barrels uses the spinning principle of the elastic and anti-collision wear-resisting rotating barrel support on the post. Through decomposition the shock from motor vehicles, so as to effectively reduce the traffic accidents. The anti crash highway safety roller barrier made from EVA and polyethylene composite material. This material is anti-collision and wear-resisting, can avoid the rolling barrel was hit and effectively to protect the guardrail and the passenger.

Feature:


roller barrier

roller barrier features



  • W-beam Plastic Sprayed Corrugated Beam 4.0mm
    Introduction of W-beam Plastic Sprayed Corrugated Beam 4.0mm: The surface of the corrugated guardrail is divided into two forms, hot galvanizing and plastic sprayed . Spray-plastic guardrails are spra... W-beam Plastic Sprayed Corrugated Beam 4.0mm
  • H Shaped Post
    Introduction of H Shaped Post: According to the engineering requirements, H shaped steel columns are gradually used.The column can be divided into the galvanizing column, plastic column, flanged colum... H Shaped Post
  • Thrie-beam Plastic Sprayed Corrugated Beam 4.0
    Introduction of Thrie-beam Plastic Sprayed Corrugated Beam 3.0: Three guardrail plate length average of 4.32 meters, width is 506 millimeter, the cross-section width is 85 mm - 85 mm, the thickness of... Thrie-beam Plastic Sprayed Corrugated Beam 4.0
  • Screw
  • Spacer
  • W-beam Galvanized Corrugated Beam 4.0mm
    Introduction of W-beam Galvanized Corrugated Beam 4.0mm: In the daily use of collision guardrails, the use of W-beam hot dipped galvanized guardrail is the most widely used. W-beam Hot dipped galvani... W-beam Galvanized Corrugated Beam 4.0mm
  • Highway Guardrail Bull Nose End
    The highway guardrail terminal is generally divided into fishtail end, bull nose end , buffer end and central divider end. Different types of highway terminals apply to different locations. The nose e... Highway Guardrail Bull Nose End
  • Anti-crash Highway Safety Roller Barrier Accessories
roller barrier specifications

Roller (Royalty barrel)

  345 x 490 mm

Post

  140 x 4.5 x 2200 mm

Cross beam

  100 x 80 x 4.0 mm

Turning circle

  195 x 145 x 5.0 mm

Square buckle

  64 x 64 x 4.0 mm

Terminal

  130 x 230 x 4.0 mm

Bolt & Nuts

  M18 x 70 mm, M19x60 , M19x120

Roller material

  EVA Polyurethane and 600g hot dip galvanized steel

Operating temperature

  -60℃ ~ 70℃ 

roller barrier application
roller barrier installation
Leave a Message Email Us

we will contact you within 24 hours.